Mime-Version: |
1.0 |
Content-Type: |
text/plain; charset="us-ascii" |
Old-Return-Path: |
|
Date: |
Tue, 8 Apr 1997 11:07:06 -0400 |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
From [log in to unmask] Tue Apr 8 11: |
00:34 1997 |
TO: |
|
Return-Path: |
<TechNet-request> |
X-Loop: |
|
Resent-Message-ID: |
<"IA-tT3.0._XC.LpbIp"@ipc> |
Subject: |
|
From: |
|
Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0wEcKs-000BipC; Tue, 8 Apr 97 09:57 CDT |
X-Sender: |
|
X-Mailer: |
Windows Eudora Light Version 1.5.2 |
Message-Id: |
|
Parts/Attachments: |
|
|
Hi Technetters:
I am investigating an improvement to the ink stamping process
used in our facility. We currently mark pwbs with a two part epoxy ink
and an oven cure. I was hoping you could offer some information on
marking pwbs using UV ink that meets MIL-P-55110 or MIL-STD-130 requirements,
or any other process improvement that we could implement.
We are a small volume pwb facility and your comments would be
appreciated.
Thank you
Bob Dewlin
Modular Components National, Inc.
2302 Industry Court
Forest Hill, MD 2150
PH (410) 879-6553
Fax (410) 838-7629
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|