TECHNET Archives

April 1997

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
RON MOWBRAY <[log in to unmask]>
Date:
Mon, 14 Apr 1997 16:32:45 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (32 lines)
   There has been a lot of discussion at our factory about
what the industry is using as the standard lead length. The
boards we produce are mixed technology that have 1206 and
0805 components glued onthe wave soldered side.  IPC-610
section 3.5.3 states Class 1 as any length that doesn't
cause shorts, Class 2 as 2.5mm max. and Class 3 as
1.5mm.  Currently we are using class 2 because we don't
build any mil spec products.  I would like to hear from others
on what they are using in there factories and how that length
is achived either by component prepping, cut and clinch
equipment before wave, post wave clipping or post wave
sawing.

                                                   Thanks for your help  

Paradyne Corporation
Ron Mowbray
[log in to unmask]
Largo, Fl.

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************



ATOM RSS1 RSS2