Subject: | |
From: | |
Date: | Fri, 14 Mar 1997 08:39:46 +0500 (GMT+0500) |
Content-Type: | TEXT/PLAIN |
Parts/Attachments: |
|
|
Hello
Try CAMCAD from www.rsi-inc.com
thanks
On Thu, 13 Mar 1997, Jeff Foster wrote:
> At 08:48 AM 3/11/97 EST, Gary S Thomas wrote:
> >Does anyone know of any shareware that will convert Gerber to DXF????
> >
> >thanks in advance
> >
> >gary ...
>
> Just tried CAM350 from Advanced CAM Technologies ( http://www.ecam.com/ )
> with pretty good luck!
>
> Their current version (v4.10) has a 7 day timed access period where you can
> try all(?) the features. I'm guessing that after the 7 days it reverts to a
> crippled version until you have either a dongle (hardware key) or other
> access code which you purchase depending upon which level of feature you need.
>
>
>
> + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
> | Jeff Foster [log in to unmask] |
> | Engineering Assistant |
> | Broadcast Electronics, Inc. http://www.bdcast.com |
> + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
>
> ***************************************************************************
> * TechNet mail list is provided as a service by IPC using SmartList v3.05 *
> ***************************************************************************
> * To subscribe/unsubscribe send a message <to: [log in to unmask]> *
> * with <subject: subscribe/unsubscribe> and no text in the body. *
> ***************************************************************************
> * If you are having a problem with the IPC TechNet forum please contact *
> * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
> ***************************************************************************
>
>
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|