Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0w6jaR-000BBiC; Mon, 17 Mar 97 15:04 CST |
Encoding: |
46 TEXT |
Old-Return-Path: |
|
Date: |
Mon, 17 Mar 1997 16:12:00 -0500 |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
Resent-Message-ID: |
<"vHFQ52.0.53K.s7RBp"@ipc> |
Subject: |
|
From: |
|
From [log in to unmask] Mon Mar 17 17: |
29:37 1997 |
X-Loop: |
|
X-Mailer: |
Microsoft Exchange Server Internet Mail Connector Version 4.0.994.63 |
Message-Id: |
|
Parts/Attachments: |
|
|
When I had this problem many years ago it was because the anode bag had
been pulled up tight against the bottom of the anode. I have also heard
from others that a napped bag with too tight of a weave will not allow
the copper sulfate that forms at the anode during electrolysis to
migrate through the bag before it becomes so concentrated that it salts
out.
----------
From: tonghh
To: [log in to unmask]
Subject: Acid copper bath
Date: Monday, March 17, 1997 9:49AM
To all technet users ,
Quite often I experience copper crystallization in the acid copper
bath
which
results in plating distribution problem .Apart from the several factors
that
affect this crystallisation -fluctuating current , concentration of the
bath , anode bag , anode basket etc -maybe someone would like to share
more
on this problem and how to overcome this in the plating line.
Thanks .
************************************************************************
***
* TechNet mail list is provided as a service by IPC using SmartList
v3.05 *
************************************************************************
***
* To subscribe/unsubscribe send a message <to: [log in to unmask]>
*
* with <subject: subscribe/unsubscribe> and no text in the body.
*
************************************************************************
***
* If you are having a problem with the IPC TechNet forum please contact
*
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]
*
************************************************************************
***
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|