Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vxa2F-0000ZHC; Thu, 20 Feb 97 09:03 CST |
Encoding: |
127 TEXT |
Old-Return-Path: |
|
Date: |
Thu, 20 Feb 1997 09:06:00 -0700 |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
From [log in to unmask] Thu Feb 20 14: |
31:19 1997 |
Resent-Message-ID: |
<"7w6-91.0.wiB.IV63p"@ipc> |
Subject: |
|
From: |
|
X-Loop: |
|
Cc: |
|
X-Mailer: |
Microsoft Exchange Server Internet Mail Connector Version 4.0.994.57 |
Message-Id: |
|
Parts/Attachments: |
|
|
Mason,
The 35/35, 35/25 & 25/25 are the most common C-stage/B-stage resin
coated coppers. 35, 50,80 & 100 micron B-stage only coated coppers are
also readily available. We do not currently have a 0.25 ounce resin
coated copper product but do supply 12 micron (3/8ths oz.) resin coated
on a VLP (very low profile) copper which exhibits excellent etch factors
and increased etch rates. This product carries about a 25% premium over
the above listed 18 micron products which are coated on low profile
copper.
Kevin Thomas
AlliedSignal Laminate Systems
----------
>>>From: mhu
>>>To: [log in to unmask]
>>>Subject: Re[2]: FAB:Laser vias
>>>Date: Wednesday, February 19, 1997 10:05AM
>>>
>>>
>>>Kevin,
>>>
>>>I thought 35/35 and 35/25 are the "standard" resin thickness. Do you also
>>>supply 50/50 or 35/50 regularly? BTW, is 0.25 oz. copper avaiable without
>>>significant price increase?
>>>
>>>Mason Hu
>>>Zycon Corporation
>>>
>>>______________________________ Reply Separator
>>>_________________________________
>>>Subject: RE: FAB:Laser vias
>>>Author: [log in to unmask] at corp
>>>Date: 2/19/97 3:53 AM
>>>
>>>
>>>David - Independent of whether the resin coated copper is B-stage only
>>>or C-stage/B-stage, you are correct to assume that in order to
>>>encapsulate the innerlayer circuitry - if it's one ounce (35 micron)
>>>copper - you should have two mils (50 microns) of resin. Less resin is
>>>necessary to cover one-half ounce (18 micron) circuitry. Several
>>>different thicknesses from 35 microns to 100 microns are currently
>>>commercially available of both B-stage only or C-stage/B-stage
>>>materials.
>>>
>>>Kevin R. Thomas
>>>MicroVia Materials Product Manager
>>>AlliedSignal Laminate Systems
>>>608.791.2288
>>> ----------
>>>>>>From: David Arivett
>>>>>>To: [log in to unmask]
>>>>>>Subject: FAB:Laser vias
>>>>>>Date: Saturday, February 15, 1997 12:54PM
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> An article in the February edition of PCFAB talks about laser drilled
>>>>>>micro-vias. It shows a multi-layer stack-up of two cores with pre preg
>>>in
>>>>>>the center. The outer layers are formed with resin coated foil. My
>>>question
>>>>>>is: how thick is the resin on the foil? I am sure it must be at least 2
>>>>>>mils
>>>>>>in order to have enough resin to encapsulate the inner layer circuitry.
>>>>>>What
>>>>>>is the maximum it might be?
>>>>>>
>>>>>>David Arivett
>>>>>>Cuplex Inc.
>>>>>>
>>>>>>************************************************************************
*
>>>**
>>>>>>* TechNet mail list is provided as a service by IPC using SmartList
>>>v3.05 *
>>>>>>************************************************************************
*
>>>**
>>>>>>* To subscribe/unsubscribe send a message <to: [log in to unmask]>
>>> *
>>>>>>* with <subject: subscribe/unsubscribe> and no text in the body.
>>> *
>>>>>>************************************************************************
*
>>>**
>>>>>>* If you are having a problem with the IPC TechNet forum please contact
>>> *
>>>>>>* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]
>>> *
>>>>>>************************************************************************
*
>>>**
>>>>>>
>>>>>>
>>>
>>>***************************************************************************
>>>
>>>* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
>>>
>>>***************************************************************************
>>>
>>>* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
>>>
>>>* with <subject: subscribe/unsubscribe> and no text in the body. *
>>>
>>>***************************************************************************
>>>
>>>* If you are having a problem with the IPC TechNet forum please contact *
>>>
>>>* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
>>>
>>>***************************************************************************
>>>
>>>
>>>***************************************************************************
>>>* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
>>>***************************************************************************
>>>* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
>>>* with <subject: subscribe/unsubscribe> and no text in the body. *
>>>***************************************************************************
>>>* If you are having a problem with the IPC TechNet forum please contact *
>>>* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
>>>***************************************************************************
>>>
>>>
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|