Subject: | |
From: | |
Date: | Tue, 28 Jan 1997 12:55:47 -0600 (CST) |
Content-Type: | TEXT/PLAIN |
Parts/Attachments: |
|
|
Mike, I'm not sure why I was on SST's web page, and I can't answer your
question, maybe someone on [log in to unmask] will be able to provide
information.
Regards
Dave Bergman, IPC
On Tue, 28 Jan 1997 [log in to unmask] wrote:
> Dear David
>
> I noticed your company`s name listed under conferences on Solid State
> Technology`s web page http:/www.solid-state.com with your name mentioned as
> contact person for the conference which was held between 19 and 24 December
> last year.
>
> Not having had much success here in South Africa with my enquiry, it would be
> appreciated if you could possibly assist with the following:
>
> "What are the dimensions of the smallest aluminium metallized contact pad to
> which conductive epoxies can be successfully applied on a high speed IC
> assembly line, and what epoxies would you recommend?".
>
> I would be most grateful for any assistance you could offer in this regard.
>
> Yours sincerely
>
> Mike
>
> ----
>
> Mike Crooke, P O Box 2531, Durbanville 7551,
> South Africa. Tel: (+27) (021) 975-4545.
> E-mail: <[log in to unmask]>
>
>
>
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|