Subject: | |
From: | |
Date: | Tue, 12 Nov 1996 13:21:39 -0600 |
Content-Type: | multipart/mixed |
Parts/Attachments: |
|
|
Jim,
Did you look at Interflux IF-14 cored solder?
We tried it at another job location and thought it looked pretty good.
One needs to heat the area with a hot air tool after soldering to
dissipate the remaining flux residues. It might be worth a try.
Charlie Barker
218/552-3328
[log in to unmask]
To: technet @ ipc.org
cc: (bcc: Charles Barker/IO-US)
From: TechNet @ ipc.org
Date: 11/07/96 01:32:27 PM PST
Subject: Re: Subj: No-clean Repair
We've tried to qualify (J-STD-001A, NAWC MT-0002, or MIL-STD-2000B) a low
solids flux in a no-clean process (for hand soldered assemblies which
cannot be subjected to our in-line aqueous cleaner) with no success. It
seems that the excess flux which is not directly subjected to the heat of
the soldering iron caused the test board (IPC-B-36) to fail SIR, no
matter how we tried to limit the volume of flux deposited.
We had to revert back to RMA flux for these instances and hand clean with
an IPA blend.
Jim Marsico
(516) 595-5879
[log in to unmask]
********************************
* ______ _ _ _____ *
* / ___ | | | | | _____ *
* / /___| | | | | | _____ *
* __/ ____ | | | | |______ *
* |____/ |_| |_| |________| *
* *
* SYSTEMS, INC. *
********************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|