Subject: | |
From: | |
Date: | Fri, 20 Dec 1996 06:30:19 -0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Timothy,
When you look at the nodules under high power or microsection do
they appear to be small/short/and round or kind stringy?
Air agitation....when was the last time you changed your blowers' filters
and are they exposed to a semi dirty area susceptible to wind?
Could you have algae growth in your brightner tank? This seems to be
fairly common.<??????>
Thoughts....
Groovy
Date: Thu, 19 Dec 1996 13:10:09 -0500
From: [log in to unmask] (Timothy Gaylor)
To: [log in to unmask]
Subject: Copper plating
Message-Id: <[log in to unmask]>
Content-Type: TEXT/PLAIN; CHARSET=US-ASCII
Content-Transfer-Encoding: 7BIT
At first we had a few worries of contaminants in the plating baths and
we Carbon and peroxide treated one bath and no improvement. There were
a few suggestions of having fungus in the brightner lines, as it is
automatically added based on an amphour meter.
All brightner lines were changes to eliminate this possibility.
For more information about the baths:
All three acid copper baths are in the same plating line. All baths
using one hoist and is controlled by a central computer.
The nodules seem to have shown up in all three baths apporximately the
same time.
Characteristics all three baths have in common:
Same agitation speed
Central controller (computer)
All three baths are Hot loading-with a 5 second lag
We are currently using PC-606 brightner.
All chloride levels are checked and all well within the vedors specs.
Questions:
1. Can a 5 second lag for hot loading be detrimental to copper plating?
2. What results will we see on a Copper plated panel if the ripple in
the rectifier is excessive.
If you have any suggestions or need more info, please let me know.
I'll get back with you on anode to cathode distance
T. Gaylor
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|