Subject: | |
From: | |
Date: | Fri, 22 NOV 96 08:29:22 MST |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
The 62Sn,36Pb,2Ag is considered eutectic in the industry, although the true
eutectic mixture is 62.5%Sn, 36.1%Pb, 1.4%Ag at 179C(354F).
I would think your wavesolder setup is robust enough to overcome the
melting range, but if you are still concerned you might ask your paste
manufacturer for a true eutectic mix.
Most paste manufacturers generally use the 2% silver, but the rep from
Heraeus mentioned they mix the 62.5/36.1/1.4 true eutectic.
Steve A
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|