 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vVmLA-0000WZC; Thu, 5 Dec 96 16:32 CST |
| Old-Return-Path: |
|
| Date: |
Thu, 05 Dec 96 13:29:04 PST |
| Precedence: |
list |
| Resent-From: |
|
| Resent-Sender: |
|
| X-Status: |
|
| Status: |
O |
| X-Mailing-List: |
|
| TO: |
|
| Return-Path: |
<TechNet-request> |
| Resent-Message-ID: |
<"TJh0L3.0.5LN.trqfo"@ipc> |
| Subject: |
|
| From: |
|
| From [log in to unmask] Fri Dec 6 15: |
21:54 1996 |
| X-Loop: |
|
| Message-Id: |
|
| Parts/Attachments: |
|
|
We use the first drill file to locate tooling holes in 1/2 inch
phenolic material. We pin the panels to these tooling.
______________________________ Reply Separator _________________________________
Subject: Secondary Drilling
Author: [log in to unmask] at corp
Date: 12/5/96 12:03 PM
Can anyone give me some clues as to a simple approach to repinning
panels for secondary drill. How do you reposition panels on an nc
drilling machine and aling to holes already drilled. This seems to be a
major problem where I work.
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|
