 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vR42u-0000YDC; Fri, 22 Nov 96 16:26 CST |
| Sender: |
|
| Old-Return-Path: |
|
| Date: |
Fri, 22 Nov 96 17:11:00 -0500 |
| Precedence: |
list |
| Resent-From: |
|
| Resent-Sender: |
|
| X-Status: |
|
| Status: |
O |
| X-Mailing-List: |
|
| TO: |
|
| Return-Path: |
<TechNet-request> |
| X-Loop: |
|
| Resent-Message-ID: |
<"6NSBH1.0.dND.wXYbo"@ipc> |
| Subject: |
|
| From: |
|
| From [log in to unmask] Tue Dec 3 09: |
03:51 1996 |
| X-Mailer: |
Connect2-UUCP v1.00.34 |
| Organization: |
LSI |
| Message-Id: |
|
| Parts/Attachments: |
|
|
I am designing a board that has a T0-18 photodiode on it and because of
the amount of space I have to work with I cannot mount the diode on the
top of the PCB without it protruding .060 to far through the bezel. I
need to know if it would be acceptable to put a hole in the board the
size of the T0-18, slide the diode in from the back, use adhesive around
it on the top to secure it, and solder the leads to pads on the back of
the board.
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|
