Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0uWQ6x-0000CXC; Wed, 19 Jun 96 11:28 CDT |
Old-Return-Path: |
|
Date: |
Wed, 19 Jun 96 09:09:59 PST |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
From [log in to unmask] Fri Jun 21 08: |
39:31 1996 |
TO: |
|
Return-Path: |
<TechNet-request> |
Resent-Message-ID: |
<"Ajflk3.0.lG6.Mg2on"@ipc> |
Subject: |
|
From: |
|
X-Loop: |
|
Message-Id: |
|
Parts/Attachments: |
|
|
Are you talking about primary image or solder mask?
______________________________ Reply Separator _________________________________
Subject: FAB: photoresist adhesion - testing and process control
Author: [log in to unmask] at corp
Date: 6/19/96 8:32 AM
Last month there were some brief discussions of resist adhesion. Using
ASTM D3359-87(a cross-hatch test) was suggested.
My questions are:
1) is anyone using such a test for testing acceptance of laminated
photoresist?
2) is anyone using such a test for process control in lamination or
exposure or developing of photoresist?
3) what defects can appear if adhesion is too low?
4) what defects can appear if adhesion is too high?
I would like to discuss these with any interested parties.
Lou Hart
412-858-6117
compunetics
.
|
|
|