Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0uS3lQ-0000CcC; Fri, 7 Jun 96 10:47 CDT |
Content-Type: |
text/plain; charset="us-ascii" |
Old-Return-Path: |
|
Date: |
Fri, 7 Jun 1996 11:03:03 -0400 |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
X-Sender: |
gary@gateway |
TO: |
|
Return-Path: |
<TechNet-request> |
X-Loop: |
|
From [log in to unmask] Fri Jun 7 11: |
29:40 1996 |
Resent-Message-ID: |
<"R3ZYA2.0.7jH.dy4kn"@ipc> |
Subject: |
|
From: |
|
Cc: |
|
Mime-Version: |
1.0 |
X-Mailer: |
Windows Eudora Light Version 1.5.2 |
Message-Id: |
|
Parts/Attachments: |
|
|
The IPC has an SMT Assembly Benckmark Artwork/Boards identified as
IPC-A-28/IPC-B-28. This board was co-developed by the IPC Designers Council
and SMEMA. The test vehicle measures 20 x 28 cm. Eight 50 sq.mm zones have
been duplicated to fill the vehicle's 20 zone locations. The component
patterns run the gamut from chip components to SOIC; from PLCC to flat
packs. The artwork includes two circuitry layers and two soldermask layers.
Customization of the artwork is possible.
Check with the IPC for pricing.
At 10:42 AM 6/7/96 -0400, [log in to unmask] wrote:
>I would like to do some testing on various SMT processes, and would like to
>use an industry standard
>pattern. Does the IPC supply a suitable artwork, and how can I acquire it.
>Thanks in advance.
>
>
Regards,
Gary Ferrari
Tech Circuits
(203)269-3311
[log in to unmask]
|
|
|