Lou:
        What is Solder Float shock testing.


______________________________ Reply Separator _________________________________
Subject: Solder Float/Shock Testing
Author:  [log in to unmask] at ~INTERNET
Date:    8/22/95 12:02 PM


Received: by ccmail
Received:  from netcomsv by pragma.com (UUPC/extended 1.11) with UUCP;
           Tue, 22 Aug 1995 12:01:39 PDT
Received: from miso.wwa.com by netcomsv.netcom.com with SMTP (8.6.12/SMI-4.1)
    id LAA00637; Tue, 22 Aug 1995 11:33:59 -0700
Resent-Date: Tue, 22 Aug 1995 11:33:59 -0700 
Received: from ipc by miso.wwa.com with uucp
    (Smail3.1.28.1 #8) id m0skyB5-000FccC; Tue, 22 Aug 95 13:35 CDT
Received: by ipchq.com (Smail3.1.28.1 #2)
    id m0skxHy-0000GeC; Tue, 22 Aug 95 12:39 CDT
Old-Return-Path: <miso!aol.com!EnviEng> 
Date: Tue, 22 Aug 1995 13:33:55 -0400 
From: [log in to unmask]
X-ccAdmin: postmaster@netcomsv
Message-ID: <[log in to unmask]> 
To: [log in to unmask]
Subject: Solder Float/Shock Testing
Resent-Message-ID: <"vZ6Dn1.0.GSI.rOXEm"@ipc> 
Resent-From: [log in to unmask]
X-ccAdmin: postmaster@netcomsv
X-Mailing-List: <[log in to unmask]> archive/latest/926 
X-Loop: [log in to unmask]
Precedence: list
Resent-Sender: [log in to unmask]
     
Hello all:
     
We would like some information on temperature and time required prior to 
testing a sample in the solder pot for solder float/shock testing.
     
We checked in the IPC Test Methods but could not find the specific 
information that we were looking for.  Any help would be greatly appreciated!
     
Sincerely,
     
Lou Cerone, Process Engineer
Benny George, Quality Control Tech