 
| Received: |
by ipchq.com (Smail3.1.28.1 #2)
id m0syRFa-0000HbC; Thu, 28 Sep 95 17:16 CDT |
| Old-Return-Path: |
|
| Date: |
Thu, 28 Sep 1995 17:27:39 -0500 |
| Precedence: |
list |
| X-Loop: |
|
| Resent-Sender: |
|
| X-Status: |
|
| Status: |
O |
| X-Mailing-List: |
|
| TO: |
|
| Return-Path: |
|
| Resent-Message-ID: |
<"6Y5Q9.0.0nD.8wnQm"@ipc> |
| Subject: |
|
| From: |
|
| Resent-From: |
|
| From [log in to unmask] Sat Apr 27 14: |
54:33 1996 |
| Message-Id: |
|
| Parts/Attachments: |
|
|
In evaluating temperature profiles for an IR reflow system, I am
looking for the best method of attaching thermocouples to a polyimide
substrate, the board surface finish, and the SMD.
The solder paste has a 280 deg/C (eutectic) reflow temp; therefore the
method used needs to be capable of surviving temps @ or above 350 deg
Celsius.
Any recommendations ???
DJDrake
DRAKE@SSDSRDCC
(713) 987-4365
|
|
|
