 
| Received: |
by ipchq.com (Smail3.1.28.1 #2)
id m0s7Vot-0000GnC; Fri, 5 May 95 17:25 CDT |
| Old-Return-Path: |
<miso!corp.zycon.com!jyoung> |
| Date: |
Fri, 05 May 95 14:53:59 PST |
| Precedence: |
list |
| X-Loop: |
|
| From [log in to unmask] Thu Apr 25 15: |
26:03 1996 |
| Resent-Sender: |
|
| X-Status: |
|
| Status: |
O |
| X-Mailing-List: |
|
| TO: |
|
| Return-Path: |
|
| Resent-Message-ID: |
<"Q7rke1.0.8FA.rNggl"@ipc> |
| Subject: |
|
| From: |
|
| Resent-From: |
|
| Message-Id: |
|
| Parts/Attachments: |
|
|
Kelly,
From Enthones data sheet, the dielectric strength is listed as
>500 VDC. This should be volts per mil. If you need additional
information, you can contact our Enthone technical rep (Greg Beck)
at 800-548-9801, ext/box 7213
Hope this helps.
John
______________________________ Reply Separator _________________________________
Subject: Enthone DSR 3241 Solder Mask
Author: [log in to unmask] at corp
Date: 5/4/95 4:06 PM
From: Kelly Kovalovsky, Raw Card Quality Engineering
_ Phone:704-595-7336 Tie Line:795-7336 FAX Ext. 4727
Subject: Enthone DSR 3241 Solder Mask
Can someone provide me with the dielectric strength of Enthone DSR
3241 solder mask?
Kelly Kovalovsky
IBM Microelectronics Division
6800 IBM Drive MG12/251
Charlotte, NC 28262-8563
|
|
|
