Including changes in wetting angles which could affect solder volumes.
Regards,
Bev
-----Original Message-----
From: TechNet <[log in to unmask]> On Behalf Of Stadem, Richard D
Sent: November 4, 2020 9:16 AM
To: [log in to unmask]
Subject: Re: [TN] Amount THT Solder Volume Calculator
I see. I do not know of a method to calculate the amount of solder used, or
if there is a formula for doing so.
It would have to be somewhat generic, using a calculated amount of solder
for each PTH component type. Lots of variability in terms of pad sizes,
changes in temperature of the PTH leads due to differing copper connections,
etc, etc.
-----Original Message-----
From: Datacom - Juliano Ribeiro <[log in to unmask]>
Sent: Wednesday, November 4, 2020 8:06 AM
To: Stadem, Richard D <[log in to unmask]>; 'TechNet E-Mail Forum'
<[log in to unmask]>
Subject: RES: [TN] Amount THT Solder Volume Calculator
----
External E-mail --- CAUTION: This email originated from outside GDMS. Do not
click links or open attachments unless you recognize the sender and know the
content is safe.
Hello Stadem
We currently use this method but we have +1000 PCBA different to measure and
we would have to calculate it to put in our ERP system and then we will to
update.
Best regards
Juliano Bettim Ribeiro
DATACOM
Engenharia de Processos
Rua América, 1000, Bairro Industrial, Eldorado do Sul, RS - 92990-000
Telefone: +55 51 39333000 - Ramal 3484
Telefone Celular: +55 51 98446-2135
Fax: +55 51 39333003
site: www.datacom.ind.br
e-mail: [log in to unmask]
-----Mensagem original-----
De: Stadem, Richard D [mailto:[log in to unmask]] Enviada em:
quarta-feira, 4 de novembro de 2020 10:47
Para: TechNet E-Mail Forum; Datacom - Juliano Ribeiro
Assunto: RE: [TN] Amount THT Solder Volume Calculator
How precise do you have to be? You can simply weigh some of the populated
CCAs on a precision scale prior to soldering and again after soldering to
get the average weight of solder per assembly. The moisture weight loss
would be very minimal. A sample size of 8 will give you a 99.9% accurate
mean average. No loss of product, just perform the weighing using production
samples.
-----Original Message-----
From: TechNet <[log in to unmask]> On Behalf Of Datacom - Juliano Ribeiro
Sent: Wednesday, November 4, 2020 7:25 AM
To: [log in to unmask]
Subject: [TN] Amount THT Solder Volume Calculator
----
External E-mail --- CAUTION: This email originated from outside GDMS. Do not
click links or open attachments unless you recognize the sender and know the
content is safe.
Hello to all
We need to calculate the theoretical amount of solder (In the wave solder -
THT components) that will be used for each board, so Is there formula to
calculate THT solder volume?
For example for SMD solder paste volume we use Greely formula to calculate
the theoretical amount of solder paste.
ie: Greely Formula
Greely = (Alloy Specific Gravity x Flux Specific Gravity) / (Flux % x Alloy
Specific Gravity )+ (Metal % x Flux Specific Gravity)
Thank you
Juliano Bettim Ribeiro
DATACOM
Engenharia de Processos
Rua América, 1000, Bairro Industrial, Eldorado do Sul, RS - 92990-000
Telefone: +55 51 39333000 - Ramal 3484
Telefone Celular: +55 51 98446-2135
Fax: +55 51 39333003
site: <http://www.datacom.ind.br/> www.datacom.ind.br
e-mail: <mailto:[log in to unmask]>
[log in to unmask]
|