On 3/6/2017 12:52 PM, [log in to unmask] wrote:

what about drill bits ?

> Dell - Internal Use - Confidential
>
> Ed,
>
>     Thanks for sharing the link.   However, that an expensive throw away pin when pin is contaminate with epoxy or bent during extraction.   I was looking for a lesser expansive round steel pin price.   Straight paper clip wire would work just fine.
>
> Victor,
>
> -----Original Message-----
> From: Ed Popielarski [mailto:[log in to unmask]]
> Sent: Monday, March 6, 2017 2:43 PM
> To: TechNet E-Mail Forum <[log in to unmask]>; Hernandez, Victor G <[log in to unmask]>
> Subject: RE: Round, Non Critical Tolerance, PWB Index pins
>
> This might work:
>
> https://www.mscdirect.com/browse/tn/Measuring-Inspecting/Class-Zz-Minus-Plug-Pin-Gages?searchterm=pin+gage&navid=4287923219#navid=4287923219+4287924734&searchterm=pin+gage
>
>
> Ed Popielarski
> Engineering Manager
>
>
>                                 970 NE 21st Ct.
>                                Oak Harbor, Wa. 98277
>
>                                Ph: 360-675-1322
>                                Fx: 206-624-0695
>                                Cl: 360-544-2289
>
>
>
>         "It's one kind of victory to slay a beast, move a mountain, and cross a chasm, but it's another kind altogether to realize that the beast, the mountain, and the chasm were of your own design."
> https://goo.gl/maps/mMjg43rXeFB2
>
> -----Original Message-----
> From: TechNet [mailto:[log in to unmask]] On Behalf Of [log in to unmask]<mailto:[log in to unmask]>
> Sent: Monday, March 06, 2017 12:14 PM
> To: [log in to unmask]<mailto:[log in to unmask]>
> Subject: [TN] Round, Non Critical Tolerance, PWB Index pins
>
> Fellow TechNetters:
>
>      I am searching for a vendor that provides PWB index pins in the diameter range of 8-20 mils.   This is for low quantities order of less than 100 pcs.   I even considered piano wire.   The desire length is 2 inches.
>
> Victor,
>
>