You will be just fine :-)
Vladimir Igoshev PhD
SENTEC Testing Laboratory Inc.
80 Esna Park Drive, Unit 25
Markham, ON L3R 2R6
Phone: 647-495-8727
Cell: 416-899-1882
[log in to unmask]
www.sentec.ca
Original Message
From: GRIVON Arnaud
Sent: Thursday, March 23, 2017 05:01
To: [log in to unmask]
Reply To: TechNet E-Mail Forum
Subject: [TN] [COM] Tin-Lead Assembly of SAC305 PTH Connectors
Dear TechNetters,
I have a coming situation where one PTH connector will be degolded and reterminated using a SAC305 solder dipping process.
Should I expect wetting/soldering concerns assuming a Tin-Lead soldering process such as wave or selective wave?
I have no experience or knowledge of such configuration and am wondering about possible issues due to short contact times between the SAC305 pin finish and the Tin-Lead solder.
Thanks in advance for your inputs.
Best regards,
Arnaud Grivon
PCB/PCBA Technology Expert
"Un expert, c'est un homme qui connaît de plus en plus sur de moins en moins de choses"
Thales/Group Industry/IPT/TP
19 - 21 avenue Morane Saulnier
Bât. Boreal - Bureau B4028A
78140 VELIZY VILLACOUBLAY
France
Tél : (+33) (0)1 70 28 23 88
Visit our website : http://<http://www.thalesgroup.com/>www.thalesgroup.com<http://www.thalesgroup.com/>
New - Accès WIKI Electronic Board Assembly : https://wiki.corp.thales/display/IIPT/Printed+Circuit+Board+Assembly
Accès Technical Standard: https://ecm.corp.thales/Livelink/livelink.exe/open/19267331
Accès KM Hardware: https<https://ecm.corp.thales/Livelink/livelink.exe/open/thales_km_hardware>://ecm.corp.thales/Livelink/livelink.exe/open/thales_km_hardware<https://ecm.corp.thales/Livelink/livelink.exe/open/thales_km_hardware>