Dear TechNetters, I have a coming situation where one PTH connector will be degolded and reterminated using a SAC305 solder dipping process. Should I expect wetting/soldering concerns assuming a Tin-Lead soldering process such as wave or selective wave? I have no experience or knowledge of such configuration and am wondering about possible issues due to short contact times between the SAC305 pin finish and the Tin-Lead solder. Thanks in advance for your inputs. Best regards, Arnaud Grivon PCB/PCBA Technology Expert "Un expert, c'est un homme qui connaît de plus en plus sur de moins en moins de choses" Thales/Group Industry/IPT/TP 19 - 21 avenue Morane Saulnier Bât. Boreal - Bureau B4028A 78140 VELIZY VILLACOUBLAY France Tél : (+33) (0)1 70 28 23 88 Visit our website : http://<http://www.thalesgroup.com/>www.thalesgroup.com<http://www.thalesgroup.com/> New - Accès WIKI Electronic Board Assembly : https://wiki.corp.thales/display/IIPT/Printed+Circuit+Board+Assembly Accès Technical Standard: https://ecm.corp.thales/Livelink/livelink.exe/open/19267331 Accès KM Hardware: https<https://ecm.corp.thales/Livelink/livelink.exe/open/thales_km_hardware>://ecm.corp.thales/Livelink/livelink.exe/open/thales_km_hardware<https://ecm.corp.thales/Livelink/livelink.exe/open/thales_km_hardware>