Subject: | |
From: | |
Reply To: | |
Date: | Fri, 7 Oct 2016 11:05:10 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Do you have any pictures that Steve could post on the configuration?
Dave
On Fri, Oct 7, 2016 at 11:02 AM, Avni Selim Özçukurlu <
[log in to unmask]> wrote:
> Hello All,
>
> I have a question about smd assembly. In the attachment, there are five
> capacitors that mounted like POP. It's height is 10mm. Is there any
> constraint about height of smd components in the IPC-A-610 or any IPC.
>
> We have a trouble about Reflow process for 10mm-component. Solder is not
> run towards to top and it happens cold solder.
>
>
> A.Selim ÖZÇUKURLU
> Aselsan MGEO - CCA Production and Test Engineer
>
>
> ######################################################################
> Dikkat:
>
> Bu elektronik posta mesaji kisisel ve ozeldir. Eger size
> gonderilmediyse lutfen gondericiyi bilgilendirip mesaji siliniz.
> Firmamiza gelen ve giden mesajlar virus taramasindan gecirilmekte,
> guvenlik nedeni ile kontrol edilerek saklanmaktadir. Mesajdaki
> gorusler ve bakis acisi gondericiye ait olup Aselsan A.S. resmi
> gorusu olmak zorunda degildir.
>
> ######################################################################
> Attention:
>
> This e-mail message is privileged and confidential. If you are
> not the intended recipient please delete the message and notify
> the sender. E-mails to and from the company are monitored for
> operational reasons and in accordance with lawful business practices.
> Any views or opinions presented are solely those of the author and
> do not necessarily represent the views of the company.
>
> ######################################################################
>
|
|
|