Do you have any pictures that Steve could post on the configuration? Dave On Fri, Oct 7, 2016 at 11:02 AM, Avni Selim Özçukurlu < [log in to unmask]> wrote: > Hello All, > > I have a question about smd assembly. In the attachment, there are five > capacitors that mounted like POP. It's height is 10mm. Is there any > constraint about height of smd components in the IPC-A-610 or any IPC. > > We have a trouble about Reflow process for 10mm-component. Solder is not > run towards to top and it happens cold solder. > > > A.Selim ÖZÇUKURLU > Aselsan MGEO - CCA Production and Test Engineer > > > ###################################################################### > Dikkat: > > Bu elektronik posta mesaji kisisel ve ozeldir. Eger size > gonderilmediyse lutfen gondericiyi bilgilendirip mesaji siliniz. > Firmamiza gelen ve giden mesajlar virus taramasindan gecirilmekte, > guvenlik nedeni ile kontrol edilerek saklanmaktadir. Mesajdaki > gorusler ve bakis acisi gondericiye ait olup Aselsan A.S. resmi > gorusu olmak zorunda degildir. > > ###################################################################### > Attention: > > This e-mail message is privileged and confidential. If you are > not the intended recipient please delete the message and notify > the sender. E-mails to and from the company are monitored for > operational reasons and in accordance with lawful business practices. > Any views or opinions presented are solely those of the author and > do not necessarily represent the views of the company. > > ###################################################################### >