It doesn't look like they will break off or cause any shorting potential. I
would not replace them. But, I would not try to get the AOI to pass them
either. I wonder what the component drawing looks like. I might reject the
reel of parts. It is as you say sloppy. 
Guy

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Jim West
Sent: Friday, September 26, 2014 1:57 PM
To: [log in to unmask]
Subject: Re: [TN] Chip Resistor termination end solder covering part
marking.

The solder is directly on top of the silkscreen marking.  The solder
covering the resistor terminations is part of the chip manufacturing
process.  A little sloppy and something that I have not come across before.


Other thoughts?


Jim



-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Victor Hernandez
Sent: Friday, September 26, 2014 1:43 PM
To: [log in to unmask]
Subject: [TN] FW: Chip Resistor termination end solder covering part
marking.

Is the solder on top of the white silkscreen markings.   Kinda of strange.
Is the extract solder there to cover the Ag termination and keep for
creating whiskers.

Victor,

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Jim West
Sent: Friday, September 26, 2014 12:01 PM
To: [log in to unmask]
Subject: [TN] Chip Resistor termination end solder covering part marking.

Hi All,

Please see links below. The extra solder that is attached to the termination
side but also covering the part marking.

Obviously, our AOI is failing for the part marking which is a pain. I'm
curious on what everyone's thoughts are regarding the extra piece of solder
extending out on the body of the resistor? I've tried to remove the extra
solder but it is attached and doesn't come free. Besides having to deal with
the AOI failures, what do you think about the extra solder and should I
replace the resistors?

http://stevezeva.homestead.com/102_resistor2.jpg

http://stevezeva.homestead.com/102_resistor4_onboard.jpg

Thanks,

Jim



______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________


______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________