Hi Phil,

That's what many of our customers are getting from their board suppliers and that's exactly why they ask us to do qualification!

Regards,

Vladimir Igoshev
SENTEC Testing Laboratory Inc.
11 Canadian Road, Unit 7
Scarborough, ON M1R 5G1
Phone: 647-495-8727
Cell: 416-899-1882
[log in to unmask]
www.sentec.ca
  Original Message  
From: Phil Bavaro
Sent: Tuesday, April 1, 2014 6:40 PM
To: [log in to unmask]
Reply To: TechNet E-Mail Forum
Subject: [TN] PWB Microsection Report - Photos

I have been trying to get my PWB Fabricators to include photographs of the cross sections that come in with our PWBs but have encountered resistance from some of them. Some even say they cannot do this as they don't have the camera equipment. They always include a mount with a cert and spare coupons but no picture of what is already polished in the mount.

In my opinion, looking over a spreadsheet of check marked boxes for compliance to 6012 is important, but a picture of the mount(s) reveals more information. And in my experience, when I go to a third party lab, I always get photos.


Am I asking for something that is not normally provided from a PWB Fabricator?

What do the rest of you do when it comes to inspection of microsection mounts?

Thanks in advance,

Phil
________________________________
This message and any attachments are solely for the use of the addressee and may contain L-3 proprietary information that may also be defined as USG export controlled technical data. If you are not the intended recipient, any disclosure, use or distribution of its content is prohibited. Please notify the sender by reply e-mail and immediately delete this message and any attachments.

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________