TECHNET Archives

April 2014

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Phil Bavaro <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, [log in to unmask]
Date:
Tue, 1 Apr 2014 22:39:57 +0000
Content-Type:
text/plain
Parts/Attachments:
text/plain (20 lines)
I have been trying to get my PWB Fabricators to include photographs of the cross sections that come in with our PWBs but have encountered resistance from some of them.  Some even say they cannot do this as they don't have the camera equipment. They always include a mount with a cert and spare coupons but no picture of what is already polished in the mount.

In my opinion, looking over a spreadsheet of check marked boxes for compliance to 6012 is important, but a picture of the mount(s) reveals more information.  And in my experience, when I go to a third party lab, I always get photos.


Am I asking for something that is not normally provided from a PWB Fabricator?

What do the rest of you do when it comes to inspection of microsection mounts?

Thanks in advance,

Phil
________________________________
 This message and any attachments are solely for the use of the addressee and may contain L-3 proprietary information that may also be defined as USG export controlled technical data. If you are not the intended recipient, any disclosure, use or distribution of its content is prohibited. Please notify the sender by reply e-mail and immediately delete this message and any attachments.

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

ATOM RSS1 RSS2