TECHNET Archives

February 2010

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
X-To:
Date:
Tue, 9 Feb 2010 17:36:02 -0600
Reply-To:
TechNet E-Mail Forum <[log in to unmask]>, Jack Evans <[log in to unmask]>
Subject:
MIME-Version:
1.0
Content-Type:
text/plain; charset="windows-1252"
Content-Transfer-Encoding:
quoted-printable
From:
Jack Evans <[log in to unmask]>
Parts/Attachments:
text/plain (23 lines)
For years, we have been limping along with an old HMP Soldermatics, bench 
top tinning system.  This is just a small 12lb dynamic wave solder pot with an 
articulating arm that holds various tools.  We need to replace this thing with a 
small, benchtop machine with simple tools that will tin most any configuration 
of smt or through hole components.  I was looking at a Winslow Model 880 
with a model 101 solder pot, which looks very much like what we currently 
have.  However, Winslow reports that they no longer manufacture this thing. 
Does anyone out there know of current production systems or used that are 
available?  I don't need a large Corfin, Winslow or GPD system, the latter two 
which are no longer made or barely supported. 

What are some of you other contract manufacturer using?

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2