Seen worse.........8-(

I have encountered this on a number of occasions and have come to a few
thoughts on the subject.

In my experience it is generally found on the smaller components (such as
0201) and often only on the ceramic parts.

The conclusion that I came to with this is that the flux itself is running
out of steam as the smaller components are experiencing overheating in the
ramp up phase of the reflow profile compared to the larger devices. They
have a smaller amount of solder paste and hence flux, and they are exposed
to the full effect of the reflow profile often in less densely populated
areas. Ceramic also has a very good thermal transfer co-efficient and heat
capacity compared to the other packaging materials such as BAG and other
plastic bodied parts.

The reason that I came to this conclusion is that often you will see this
effect on a small ceramic part but not at all on a QFP or a BGA.

Inevitably in the speed required to "fix" things I instructed our CEM to
back off on the ramp profile and the problem went away. And yes some
soldering materials are less "robust" in this respect.

Sad to say, but I have never seen this condition with leaded
solder...........8-)


John Burke
(408) 515 4992


-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of stephen gregory
Sent: Wednesday, January 13, 2010 12:24 PM
To: [log in to unmask]
Subject: [TN] Return of the "Snotballs"

Maybe some of you remember a post I made a couple of years ago when I was in
Tulsa and I had a reflow problem with a SAC solderpaste. It was then
I learned of a new term called "Snotballs". Here was the picture I posted
back then:
 
http://stevezeva.homestead.com/files/Snotballs.jpg
 
Well guess who decided to follow me out to Pennsylvania? Check out:
 
http://stevezeva.homestead.com/Type_4.JPG
 
Same vendor, same alloy.
 
All I can say is make sure you know where your powder is coming from. 
 
Steve Gregory

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in the
BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet
NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send
e-mail to [log in to unmask]: SET Technet Digest Search the archives of
previous posts at: http://listserv.ipc.org/archives Please visit IPC web
site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------