Hello Technet,
I would like to ask for input on processing edge mount (straddle mount)
connector at SMT,
1. What is the best process to assemble a straddle mount (edge
mount) connector on the SMT line? Since the connector has to be installed
manually prior to reflow, how can I avoid paste smearing between the
connector leads and the SMT pad? The particular connector manufacturer in
my case recommendeded a partial solder paste deposition on the pad and rely
on solder wicking to complete a solder fillet. How reliable would such process
be?
2. What are the defects and problems related to the straddle mount
connector assembly?
Any feedback is appreciated.
Peter
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------