Hi all, especially the Indi-man,
We have soldered IRC's power MOSFET (100-250 W) dice for a decade without
problems. They use to be vacuum soldered to a solderable gold thickfilm
Al2O3 substrate with AuSn 50 micrometer preforms. Now there is a production
stop because of Al heavy wire wedge bonding problems. My analysis of this
case points at the presence of large voids in the solder joints or maybe
partly dewetting (FineFocus is good but the resolution is not sufficient to
make me sure), something the US mechanical waves don't like. The die
backside is plated with something that I don't recognize: Cadmium over
Silver over Nickel. What the heck is that? Anyone who can figure out if AuSn
is the best preforms for that plating?
Thanks
/Inge
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------