Hi Pat!
I went through the standard I have here just to be sure I wasn't missing
anything, and I couldn't find anything that addresses TIG welding. You
are right, the only thing I could find about any sort of welding was
ultrasonic welding. I also looked at the section that addresses
connector damage and there wasn't anything.
Kind regards,
-Steve Gregory-
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Diamond, Pat
Sent: Wednesday, January 24, 2007 1:32 AM
To: [log in to unmask]
Subject: [TN] WHMA-A-602
Hi Technetters,
can you help? we have a supplier who makes cable harnesses for us, these
harnesses have a s/steel elbow at either end which are TIG welded. The
supplier says they weld them in accordance with WHMA-A-620, from the
information I can gather at the IPC website, this document appears to be
for cable fabrication only i.e. crimping/soldering/assembly although
Chapter 7 does cover ultrasonic welding.
Does the standard also cover TIG?
any advice - as always - would be gratefully appreciated,
best regards,
Pat Diamond
************************************************************************
****
***************
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material.
Any review, retransmission, dissemination or other use of, or taking of
any action in reliance upon, this information by persons or entities
other than the intended recipient is prohibited. If you received this in
error, please contact the sender and delete the material from any
computer.
************************************************************************
****
***************
Mr Pat Diamond
Senior Specialist Engineer
Weston Aerospace Tel: +44 (0)1252 868122
124 Victoria Road Fax: +44 (0)1252 370298
Farnborough, Hampshire, GU14 7PW Web www.westonaero.com>
England Email mailto:[log in to unmask]
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
