Hi Steve,
The root cause of tombstoning is the presence of fillets on the chip
components.
Historically, they were needed because chip components were almost always
wavesoldered.
If you reflow solder CCs, you do not need the fillets.
Reducing the fillet size by making the pads smaller--both narrower and
shorter--reduces tombstoning.
Tombstoning is worse for LF-solders than for SnPb.
The surest way of eliminating tombstoning entirely is by eliminating the
fillets--make the pads the same size as the metallization on the CC underside [or
just slightly larger]. No more tombstoning, no more CC cracking and more
reliable solder joints as well because you wind up with more solder joint height.
Werner
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------