Maybe it is just a case of terminology,
but ICT *is* a bed of nails fixture,
where functional test uses the connectors or POGO

(or am I having a senior moment?)

Jack


On 7/25/06, Haldor Husby <[log in to unmask]> wrote:
>
> Hi Nagaraj -
> I don't know what you mean by Bed of Nails testing. People mostly talk
> about bed-of nails in connection to a functional test where the nets are
> accessed through a matrix of pogo-pins. ICT (in-circuit Test) is in
> general not a functional test, but  is in the simplest form a test where
> the impedances of all accessible nets are measured to help detect
> manufacturing defects like shorts, opens, incorrect values, incorrect
> polarity etc. ICT is also referred to as Node Impedance Test (NIT).
> Modern ICT testers have many capabilities beyond just measuring
> impedance, such as boundary -scan and programming of non-volatile
> memory. Check also Agilent's testjet.
>
> Flying probe test is the prototype or low-volume version where the
> probes represent a very flexible fixture that can be programmed to hit
> all the nets in turn.  ICT tester for higher volume will have a custom
> fixture for each board, with pogo-pins that connect to all nets
> simultaneously.
>
> Agilent and Teradyne are major vendors of in-circuit test equipment. You
> can check their websites for more information
>
> http://www.teradyne.com/
> http://www.home.agilent.com/
>
> Med vennlig hilsen. Best Regards.
> __________________________________________
> Haldor Husby
> Senior Development Engineer
> Data Respons Norge
>
> [log in to unmask]
> www.datarespons.no
>
>
>
> On Mon, 24 Jul 2006 21:43:54 +0100, ert ert <[log in to unmask]> wrote:
>
> >Hi All,
> >
> >I have studied and followed ICT testing on layout with constraint
> requirements like placing in grids, spacing b/w prope pads, component to
> Probe pads spacing,..etc But I do wish to know how the ICT testting is
> carried out? Is it similar to Bed of Nails test and Flying prope test?
> >
> >If any one has any documents or have practical experience on this can you
> help be understanding this.
> >
> >Thanks much in advance.
> >Nagaraj
>

---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------