Thanks Gary but, I did find this article in reference to the
aforementioned.
One of the most important standards in the static control world was EIA
541-1988, "Packaging Material Standards for ESD Sensitive Items." Please
note the word was in the previous sentence. This venerable and
often-referenced standard was canceled by ANSI in 1999 because it had
not been updated since its introduction in 1988. ANSI documents are
supposed to have a review every five years at which time they are either
revised or formally reissued. Neither happened with EIA-541 through two
complete official review cycles.
In 1998, to address the need for an updated standard, the ESD
Association decided to develop a new packaging material standard. The
result in final form is ANSI/ESD S541-2003, "ESD Association Standard
for the Protection of Electrostatic Discharge Susceptible
Items-Packaging Materials for ESD Sensitive Items."
Benjamin C. Holmes CID
Senior Substrate Designer
Motorola Networks & Enterprise
Office: 770-338-3278
eFax: 847-761-1636
-----Original Message-----
From: DesignerCouncil [mailto:[log in to unmask]] On Behalf Of
Bremer, Gary
Sent: Thursday, July 27, 2006 4:38 PM
To: [log in to unmask]
Subject: Re: [DC] TI AppNote: MIL-PRF-81705D
Ben,
To my knowledge there is NO equivalent IPC document, EIA-541 is
referenced as a supporting document for MIL-PRF-81705
Gary Bremer
Senior Manufacturing Engineer, CIT
Curtiss-Wright Controls Inc.
Embedded Computing -Subsystem
28965 Avenue Penn
Santa Clarita, CA 91355-4185
Main: 661.257.4430 extension 2170
Fax: 661.257.4782
e-mail: [log in to unmask]
Web: www.cwcembedded.com
NOTICE: This e-mail communication is private and confidential and is
intended for the addressee only. The email may only be used for
conducting business with VISTA Controls Inc., dba Curtiss-Wright
Controls Embedded Computing Subsystems. If you are not the intended
recipient, please notify us by replying to this email followed by
deleting the email and all attachments from your system. Anyone other
than the intended recipient or those with a need to know within the
recipient's organization is strictly prohibited from using, printing,
distributing or disseminating the email or any information or attachment
contained therein.
-----Original Message-----
From: Holmes Ben-CBH033 [mailto:[log in to unmask]]
Sent: Thursday, July 27, 2006 1:23 PM
To: [log in to unmask]
Subject: [DC] TI AppNote: MIL-PRF-81705D
Hello all,
Does anyone know if there is an equivalent IPC standard (or other
industry standard) That can substitute for MIL-PRF-81705D?
Thanks
Benjamin C. Holmes CID
Senior Substrate Designer
Motorola Networks & Enterprise
Office: 770-338-3278
eFax: 847-761-1636
------------------------------------------------------------------------
---------
DesignerCouncil Mail List provided as a free service by IPC using
LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with
following text in the BODY (NOT the subject field): SIGNOFF
DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET
DesignerCouncil NOMAIL/(MAIL) Search previous postings at: www.ipc.org >
On-Line Resources & Databases
> E-mail Archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
------------------------------------------------------------------------
---------
______________________________________________________________________
------------------------------------------------------------------------
---------
DesignerCouncil Mail List provided as a free service by IPC using
LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with
following text in the BODY (NOT the subject field): SIGNOFF
DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET
DesignerCouncil NOMAIL/(MAIL) Search previous postings at: www.ipc.org >
On-Line Resources & Databases > E-mail Archives Please visit IPC web
site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
------------------------------------------------------------------------
---------
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------
|
