TECHNET Archives

July 2006

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Stadem, Richard D." <[log in to unmask]>
Reply To:
TechNet E-Mail Forum <[log in to unmask]>, Stadem, Richard D.
Date:
Mon, 10 Jul 2006 08:41:37 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (54 lines)
The processes for REWORK outlined in IPC 7711/7721 are done in order to
bring the product back into compliance with IPC-A-610D. If the inspector
is certified to 610D then they can inspect the rework.
The REPAIRS outlined in this document do not bring the product into
print compliance. Some additional material is required that is not on
the BOM or assembly drawing, such as wire jumpers, epoxy, etc. The
repair brings the product back into form, fit, and functionality, but is
still non-compliant material. Therefore review from your Materials
Review Board of the damage and inspection of the repair documented on a
non-compliant materials report should be performed. Typically you must
have MRB authority from your customer for performing repairs, and they
may request advance notification and authorization of the usage of any
particular repair procedure.

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Chafin, Ken G.
Sent: Monday, July 10, 2006 8:07 AM
To: [log in to unmask]
Subject: [TN] IPC-A-610D

If one is IPC certified per IPC-A-610 to inspect electronic assemblies,
is one thereby recognized as competent to inspect reworked, repaired or
modified electronic assemblies (Ref: IPC-7711, IPD-7721).

Or is special inspection training required for this per IPC?

I don't know if I have asked the question properly but I would be
interested in any comments.

Thanks

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------

ATOM RSS1 RSS2