Subject: | |
From: | |
Reply To: | (Designers Council Forum) |
Date: | Wed, 19 Jul 2006 10:10:41 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
We are looking for a high quality, competitive cost USA fabrication shop to
quote production quantities of a 2-layer board (bare glass only). Here are
the ballpark design criteria:
Specification = IPC-6012 Class 2
Quantities = 500, 1000, 2500, 5000 each
Overall dimensions = 8 x 4 in
Smallest trace = 0.015 in
Smallest space = 0.010 in
Smallest pitch = SOT23-5
Smallest drill = 0.035 in
Number of holes = 203
Material = FR-4, UL 94V-0, 1 oz CU
Finish = Tin-lead or lead-free HASL
Solder mask = SMOBC LPI both sides
Silkscreen = Top side only
Electrical test/ATE = Not required
We would appreciate your recommendations based on experience.
TIA and Best Regards,
----------------------------
Gary M. Koven, C.I.D.
Dynazign, Inc.
Charlotte, NC, USA
Veteran of the Marsh School
---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------
|
|
|