You need to define it for coworkers?

As far as I know there is not "official" explanation or definition for
"X-Outs".

It is performed to achieve one or more of the following;

A defective board within an array will be identified to ensure it is not
used (populated, further processed, etc). Typical methods of "X-Out" include
an "X", obviously, in indelible ink. Marking with etching pen, razor knive,
etc. or other means to ensure the product is clearly identified as
unsuitable for use.

In the past the board was just punched or drilled to signify unfit for use.

Franklin

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Ken
Sent: Tuesday, November 15, 2005 7:21 PM
To: [log in to unmask]
Subject: [TN] X-Outs

Hi all,
Does the IPC or anyone define the term "X-Out" officially?
I've used the term for years at other companies but now need to define
it
for
my current co-workers.
Thanks.
Ken

------------------------------------------------------------------------
----
---
Kenneth J. Wood C.I.D
Saturn PCB Design
2737 Bishop Lane
Deltona, Fl 32725
407-340-2668
www.saturnpcb.com <http://www.saturnpcb.com/>

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------