Sender: |
|
X-To: |
|
Date: |
Fri, 9 Sep 2005 15:27:22 -0400 |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Content-Transfer-Encoding: |
7bit |
Content-Type: |
text/plain; charset="iso-8859-1" |
From: |
|
Parts/Attachments: |
|
|
Ted
majority of shops here in Toronto are depositing from 8 to 19 microinches
silver. and of course the smaller the area on the board - the more it will
plate - if you start hitting the 20 plus range - you have a good chance for
silver migration on the pads...and so on and so on...
you mentioned sunken solder joints on PTH leads - i'd start looking if there
is enogh copper in the through holes. underplated copper will cause blow
holes when reflowed.
regards
Rich Fudalewski
----- Original Message -----
From: "Ted Kong" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, September 09, 2005 1:58 PM
Subject: [TN] Immersion Ag
> Hi Technetter,
>
> According to the fab shops, the recommended immersion
> Ag thickness ranges from 5-25 micro inches. My
> quesiton is whether having thicker immersion Ag (let
> say around 20 micro inches)would cause PTh solder
> joint defects? Will it cause sunken solder joint on
> PTH leads? If so, what is causing this to happen?
>
> Thanks all in advance.
>
> Regards,
>
> Ted Kong.
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 1.8e
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
> Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
> -----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|