Content-type: |
text/plain; charset=us-ascii |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Tue, 12 Jul 2005 09:36:39 -0400 |
MIME-Version: |
1.0 |
X-To: |
|
Reply-To: |
|
Parts/Attachments: |
|
|
The parts are now all dry and wrinkly. -Chris
Stephen Gregory
<[log in to unmask] To: [log in to unmask]
OM> cc:
Sent by: TechNet Subject: [TN] Can somebody decipher
<[log in to unmask]> this for me?
07/12/2005 08:49 AM
Please respond to TechNet
E-Mail Forum; Please
respond to Stephen.Gregory
Mornin' All!
Yesterday, I created two case numbers for technical support at Cypress
Semiconductor.
One to find out whether or not the ceramic (or aluminum oxide) part I had
was moisture
sensitive (I haven't heard back from them yet), and the other was to verify
what the gold
plating thickness is on the leads of the part since it wasn't on the data
sheet.
Below is the text pasted from the email exchange that we had:
Case number: 2LSUG88
Created at:
07/11/2005
Part
Number:5962-9759802QXC
Product:
Programmable Logic > Programmable Logic Devices
Subject:
Gold Plating Thickness on Leads...
Description:
I would like to find out what the gold plating thickness is on
the leads for the part number above.
J-STD-001 requires that the gold must be removed by a double-dip
tinning process, or by a single
dip in a dynamic solder bath if the plating is above a certain
thickness. I need this information to
determine whether or not I have to remove the gold prior to board
assembly.
Hi Stephen,
Requested part number 5962-9759802QXC is pruned part. Date of pruning is
05-may-2005.
Please advise if you still need the information although this part is
pruned.
Best Regards,
Rose Sandoval
Quality Systems & Customer Support
Cypress Manufacturing Limited, Philippines
Can somebody tell me what they're trying to say?
Kind regards,
-Steve Gregory-
Senior Process Engineer
LaBarge Incorporated
Tulsa, Oklahoma
(918) 459-2285
(918) 459-2350 FAX
__________________________________________________________________
This message may contain information that is privileged and confidential to
LaBarge, Inc. It is for use only by the individual or entity named above.
If you are not the intended recipient, you may not copy, use or deliver
this message to anyone. In such event, you should destroy the message and
kindly notify the sender by reply e-mail.
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|