Subject: | |
From: | |
Reply To: | |
Date: | Mon, 10 Jan 2005 16:50:24 -0600 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hello T'Netters,
In the absence of any replies to a question that I believe many of you
should have knowledge about, please allow me to re-post:
> Recently, the issue of the use of rigid printed wiring boards in an
> application
> which demands that printed wiring boards be pressed into an outer shell
> with some
curvature has surfaced.
> I'm accustomed to the use of flexible substrates for any applications
> which demand
that the board does not stay flat.
> However, I don't see any IPC document which mandates the use of rigid
> boards
> for 180-degree assembly applications and flex boards (or rigid-flex) for
> anything else.
>
Should rigid boards be used in applications which demancd that
the assemblies be flexed to some degree?
> Are there any guidelines for the selection of one type over another?
> Are there any reliability issues with the use of surface mount devices on
> flex boards which don't also apply to rigid boards?
> Why would a manufacturer opt for a rigid board over a flex board for
> assemblies which
> are subsequently flexed? Is this a choice based on cost?
Thanks,
Regards,
Mike
Mike Simms
Chemist
Trace Laboratories - Central
1150 W. Euclid Ave.
Palatine, IL 60067
phone 847-934-5300
fax 847-934-4600
www.tracelabs.com
Notice: This message is confidential and intended for the private use of
the addressee only.
>
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|