Steve,

Given that information I would install the led as shown. You should get
rid of the square pad. That only adds to confusion factor.

Leslie

-----Original Message-----
From: DesignerCouncil [mailto:[log in to unmask]] On Behalf Of
Matthew Lamkin
Sent: Tuesday, October 26, 2004 7:17 AM
To: [log in to unmask]
Subject: Re: [DC] Pin Numbering Question

Being picky but...

The illustration that you made may be better off being mirrored so that
it appears the same way around that the LED is on the board, Cathode to
the Right.

Also your illustration shows a square pad for the Anode, this is not
found on the PCB?

Matthew Lamkin.




-----Original Message-----
From: DesignerCouncil [mailto:[log in to unmask]]On Behalf Of Steve
Gregory
Sent: Tuesday, October 26, 2004 3:10 PM
To: [log in to unmask]
Subject: Re: [DC] Pin Numbering Question


Mornin' All!

Like I said I would do last night, I got pictures!

Look at:

http://www.stevezeva.homestead.com/files/LEDPin1.jpg

and tell me if we installed this LED correctly.

Then look at:

http://www.stevezeva.homestead.com/files/LEDPolarity.jpg

and tell me if this this illustration I made for our operators is
correct.

(This ought to be good)

-Steve Gregory-

------------------------------------------------------------------------
---------
DesignerCouncil Mail List provided as a free service by IPC using
LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET
DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases
> E-mail Archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
------------------------------------------------------------------------
---------

------------------------------------------------------------------------
---------
DesignerCouncil Mail List provided as a free service by IPC using
LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET
DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases
> E-mail Archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
------------------------------------------------------------------------
---------

---------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF DesignerCouncil.
To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
---------------------------------------------------------------------------------