Mark,
if you saw my PS. you'd get it right. I said: the expression I use, 'Xilinx' problems, was in imperfectum. We have nil problems today, Xilinx works good. Furthermore, Xilinx were very assistive and helped us with analysis. Cooperation with them was all good.
Regards
Ingemar
This communication is confidential and intended solely for the addressee(s). Any unauthorized review, use, disclosure or distribution is prohibited. If you believe this message has been sent to you in error, please notify the sender by replying to this transmission and delete the message without disclosing it. Thank you.
E-mail including attachments is susceptible to data corruption, interruption, unauthorized amendment, tampering and viruses, and we only send and receive e-mails on the basis that we are not liable for any such corruption, interception, amendment, tampering or viruses or any consequences thereof.
-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of Mark Austin
Sent: den 4 juni 2004 09:41
To: [log in to unmask]
Subject: Re: [TN] Xilinx Virtex-II BGA's...
Ingemar.
I am currently in the process of reprofiling a PCB that has a XILINX 1152
device on it, (the reason for reprofiling is we are seeing a lot of random
open circuits). Are you saying that the XILINX devices are known to give
process problems?
Thanks
Mark Austin
(Process Engineer)
ACW Technology Ltd
UK
[log in to unmask]
===== Original Message from [log in to unmask] (TechNet E-Mail Forum.) at
4/06/04 07:54
>Hi Steve,
>
>we use up to 2,500 and will see even larger soon. We had some to learn,
>that's for sure. Lucent, Mota, Xilinx, Honeywell etc were helping us with
>BGA cracks, IMC, coplanarity problem, solder criteria, pad cleanliness,
>ENIG quality, black pads and a lot more. Worst problem was one single or so
>intermittent contact on some of the many hundred balls. I would start with
>checking the coplanarity with both parts, board and BGA. After that I would
>check wetting characteristics on all pads of a whole board, to see if there
>is a spread. And visit the board maker too see what chemistry control they
>have in the daily work (6 Sigma, hate the word). Others in this forum know
>better than I, and will certainly drown you with good advice...which you
>need.
>
>If you get into IMC, black pad or other trouble, I can send you some stuff,
>or contact Jack Crawford, Georg Wenger, Kathy Kuhlow..there are some more
>near you, they have my final reporting about lots of Xilinx trouble a
>couple of years ago. They helped us, so I feel we may give something back
>to others.
>
>Hopefully, you may escape from all kind of disaster, you are a lucky guy as
>always!
>
>Cheers, bon appetite!
>
>Ingemar Hernefjord
>Ericsson Microwave Systems
>
>PS. 'Xilinx' problems can be misleading, we have absolutely zero problems
>today.
>
>This communication is confidential and intended solely for the
>addressee(s). Any unauthorized review, use, disclosure or distribution is
>prohibited. If you believe this message has been sent to you in error,
>please notify the sender by replying to this transmission and delete the
>message without disclosing it. Thank you.
>E-mail including attachments is susceptible to data corruption,
>interruption, unauthorized amendment, tampering and viruses, and we only
>send and receive e-mails on the basis that we are not liable for any such
>corruption, interception, amendment, tampering or viruses or any
>consequences thereof.
>
>
>-----Original Message-----
>From: TechNet [mailto:[log in to unmask]]On Behalf Of Steve Gregory
>Sent: den 3 juni 2004 20:09
>To: [log in to unmask]
>Subject: [TN] Xilinx Virtex-II BGA's...
>
>
>Afternoon All!
>
>We've quoted some work here to build some boards with a 3-per assembly,
>Xilinx Virtex-II, 1152-ball BGA on them.
>
>Have any of you ever placed these BGA's before? Is there anything special
>about them to look out for when assembling them?
>
>This will be my first time messing around with a BGA with that kind of ball
>count,
>and at over $6,000 each, I sure don't want to screw things up...
>
>TIA!!
>
>-Steve Gregory-
>
>---------------------------------------------------
>Technet Mail List provided as a service by IPC using LISTSERV 1.8e
>To unsubscribe, send a message to [log in to unmask] with following text in
>the BODY (NOT the subject field): SIGNOFF Technet
>To temporarily halt or (re-start) delivery of Technet send e-mail to
>[log in to unmask]: SET Technet NOMAIL or (MAIL)
>To receive ONE mailing per day of all the posts: send e-mail to
>[log in to unmask]: SET Technet Digest
>Search the archives of previous posts at: http://listserv.ipc.org/archives
>Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
>for additional information, or contact Keach Sasamori at [log in to unmask] or
>847-509-9700 ext.5315
>-----------------------------------------------------
>
>---------------------------------------------------
>Technet Mail List provided as a service by IPC using LISTSERV 1.8e
>To unsubscribe, send a message to [log in to unmask] with following text in
>the BODY (NOT the subject field): SIGNOFF Technet
>To temporarily halt or (re-start) delivery of Technet send e-mail to
>[log in to unmask]: SET Technet NOMAIL or (MAIL)
>To receive ONE mailing per day of all the posts: send e-mail to
>[log in to unmask]: SET Technet Digest
>Search the archives of previous posts at: http://listserv.ipc.org/archives
>Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16
>for additional information, or contact Keach Sasamori at [log in to unmask] or
>847-509-9700 ext.5315
>-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
|
