Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Fri, 4 Jun 2004 09:25:31 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
I have no actual experience with this, however, from what I have learned in following this list and the LeadFree list is that if you use components with Pb (lead) based finishes on the leads in a lead-free process, the reliability of the solder joints is questionable.
If you use lead-free finishes in a tin-lead soldering process effect is minimal.
Others on this list can explain why, and you may be able to find that information in a search of the archives.
Bottom line is if you are using a lead-free soldering process, it is highly recommended that all components used are also lead-free. If you still have a tin-lead process, you can mix.
Blair Hogg
QA Manager
GAI-Tronics Corp.
>>> [log in to unmask] 06/04/04 09:13AM >>>
Dear Experts,
Is it possible to use some normal components (with lead) along with
lead free components in the same PCBA. Since the tempertaure requirement of
lead free components is higher will it affect the normal components? Or is
it possible to assemble normal components first and then lead free next in
two steps. Please guide me.
Sincerely
K.Balasubramanian
Sr.Engineer, Hardware.
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
*******************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.
This footnote also confirms that this email message has been swept
for the presence of computer viruses.
www.hubbell.com - Hubbell Incorporated
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
|
|
|