TECHNET Archives

April 2003

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Tim Reeves <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Thu, 24 Apr 2003 11:42:38 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (39 lines)
You're right the IPC specs leave it open. However, you can reasonably reject boards with excessive touch-up, and the fabricator will understand that other shops can do a better job, and they need to correct the root cause. The root cause is a good question to answer BTW. If the mask got scratched off by the HASL air knives it's one thing, but if it's flaking due to bad surface prep before mask, it's another. You could reject in both cases, but the latter is more justified (IMHO)
Tim Reeves

-----Original Message-----
From: Mark Hargreaves [mailto:[log in to unmask]]
Sent: Wednesday, April 23, 2003 12:48 PM
Subject: Soldermask inspection question


Hi All,
Does IPC-6012 or IPC-SM-840 limit the size, number or location of soldermask
touch up spots allowed per board?  From what I've read, it seems that any
amount of touch up is allowable.

Thanks,
Mark

---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------

---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------

ATOM RSS1 RSS2