Sender: |
|
X-To: |
|
Date: |
Mon, 24 Feb 2003 11:00:49 -0500 |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Content-Transfer-Encoding: |
quoted-printable |
Content-Type: |
text/plain; charset="iso-8859-1" |
From: |
|
Parts/Attachments: |
|
|
John,
Wow, That seems an excessive amount of work for a heat sink finish. What is driving you to go to this level of finish?
We have upped or tightened our heat sink surface specs at quite a significant cost and I can't say that it has made a significant improvements in performance for the cost. I believe that the biggest offender for us has been contaminates (dirt, metal chips) under the Isostrate thermal transfer material that has caused a punch through during a Hi-pot test.
Phil Nutting
-----Original Message-----
From: Grabski III, John R. [mailto:[log in to unmask]]
Sent: Monday, February 24, 2003 10:15 AM
To: [log in to unmask]
Subject: [TN] off topic, more plating (kinda)...
We have a roll of silver solder in house, and I want to try a little project
with a couple heatsinks...
One's copper, the other is aluminum... They've been lapped, and have
near-mirror finish... I'd like to take 1/32" off both and drop on an even
coat of this silver solder... I don't know how well they will bond, and
wonder if some chemicals will need to be used to aid in the bonding
process...
Or do I just let it drip onto the surface??
After the silver's on there, I'm gonna lap THAT finish to mirror-ish quality
and run some temperature tests...
Any advice??
Best Regards,
John Grabski III
Badger Technologies, Inc.
---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
|
|
|