You could try either of:

http://www.empf.org/html/empfset.htm

http://www.northampton.edu/prof_com/ntc/index.htm

Or perhaps the equipment manufacturers. Not sure how much luck you'll have finding something. 

Blair Hogg
QA Manager
GAI-Tronics Corporation

>>> [log in to unmask] 11/25/02 09:03PM >>>
Everyone,

I'm looking for an organization that provides solderwave process training.
I've conducted an exhaustive internet search and have only turned up a
couple of sources (both outside the country).  I would prefer an off-site
setting, but it should be somewhere within the continental US.

This will be for two Quality associates whose sole function is to keep an
eye on this segment of our assembly process.  After their training, I'd
like for them to possess at least an intermediate level of knowledge.
Machine set-up, processing parameters, and troubleshooting should all be
covered in the session.

Can someone give me a recommendation, either on or offline?

Any assistance you could provide would be sincerely appreciated.

Leland Woodall
Quality Coordinator
Keihin Carolina System Technology, Inc.
4047 McNair Road
Tarboro, NC 27886

Phone: (252) 641-6750, ext. 2865

---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------



**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.

This footnote also confirms that this email message has been swept
for the presence of computer viruses.

www.hubbell.com - Hubbell Incorporated
**********************************************************************

---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------