TECHNET Archives

June 2002

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
X-To:
Rick Thompson <[log in to unmask]>
Date:
Wed, 5 Jun 2002 08:44:53 -0700
Reply-To:
"TechNet E-Mail Forum." <[log in to unmask]>, Steve Kelly <[log in to unmask]>
Subject:
From:
Steve Kelly <[log in to unmask]>
Content-Transfer-Encoding:
7bit
In-Reply-To:
<002b01c20c1a$209f29a0$3d00a8c0@rick>
Content-Type:
text/plain; charset="us-ascii"
MIME-Version:
1.0
Parts/Attachments:
text/plain (66 lines)
IPC-FA-251 recommends 121C for 30-60 minutes for 1 and 2 layer circuits.
A rigid flex can take easily an hour per layer depending on the
construction. The more layers the longer the time. 140C is above the
rating of acrylic adhesives and could possibly damage the bond. Regards
Steve Kelly

-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Rick Thompson
Sent: Tuesday, June 04, 2002 3:50 PM
To: [log in to unmask]
Subject: [TN] Rigid-Flex Bake Requirements??

We're assembling a fairly complex rigid-flex PCB (10 layer, sub-4mil
line/space, polyimide/FR4 sandwich) and have had some issues with
bake-out to remove moisture.  The boards we received were individually
sealed with dessicant pack and humidity indicator card in each.  Our
assumption was that they did not need baking since they were sealed and
had been fabricated only a couple of days prior.  The board vendor is
telling us they need 2 hours at 250 F bakeout, regardless of packaging.

My question is this:  Can anyone offer any guideline, insight, etc into
the baking that may be required for this type of rigid-flex PCB?  Are
there any industry standards that may cover this?

Thanks in advance,


Rick Thompson
Ventura Electronics Assembly
2655 Park Center Dr.
Simi Valley, CA 93065

+1 (805) 584-9858   x-304  voice
+1 (805) 584-1529 fax
[log in to unmask]

------------------------------------------------------------------------
---------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]:
SET Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for
additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
------------------------------------------------------------------------
---------

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------

ATOM RSS1 RSS2