Does someone know if there is an IPC standard for a SMT Ceramic Resonators
which has Castellated Terminations? Does IPC require a good Castellated
fillet on both sides of the part even though the pad is continuos?
On the middle pad we are getting good wetting on one of the Castellated
terminals.  However the other side does not have a good fillet.  I feel
that since the part has a pad all the way underneath itself, that a good
Castellated terminal one side means that the bottom pad is also soldered.
I guess the question I am asking is, according to IPC do Castellated
Terminations (section 12.2.4 of IPC-A-610 C) only apply to Leadless Chip
Carriers or any part that has a castellated terminal.  Any help on this
would be greatly appreciated.
Thanks,
 Brad Mecham

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------