Genny,
You could try copper window screen material (that's the stuff that
screens were made out of before Noah's great flood).

I seen this successfully used for a high voltage faraday cage and it is
also used on our EMC compliance test room.

Phil Nutting

-----Original Message-----
From: Genny Gibbard [mailto:[log in to unmask]]
Sent: Monday, December 10, 2001 3:11 PM
To: [log in to unmask]
Subject: [TN] RF shielding


Looking for ideas - preferably more along the lines of homemade basket
idea
(ie. go to Home Depot for the supplies and build ourselves) than booking
in
some special consultant to solve our needs.
We have test benches backing onto each other in several places on our
production floor.  Several of our products are based on similar
frequency
plans (mostly <2GHz) so sometimes tests being run on one bench will
interfere with tests being run on the bench backing onto it and will
cause
false test failures.
I am looking for some sort of RF screen or something that we can mount
and
ground between the benches to reduce what we call 'crosstalk'.
Thoughts?

Genny Gibbard (mailto:[log in to unmask])

------------------------------------------------------------------------
---------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases
> E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
------------------------------------------------------------------------
---------

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------