Genny, You could try copper window screen material (that's the stuff that screens were made out of before Noah's great flood). I seen this successfully used for a high voltage faraday cage and it is also used on our EMC compliance test room. Phil Nutting -----Original Message----- From: Genny Gibbard [mailto:[log in to unmask]] Sent: Monday, December 10, 2001 3:11 PM To: [log in to unmask] Subject: [TN] RF shielding Looking for ideas - preferably more along the lines of homemade basket idea (ie. go to Home Depot for the supplies and build ourselves) than booking in some special consultant to solve our needs. We have test benches backing onto each other in several places on our production floor. Several of our products are based on similar frequency plans (mostly <2GHz) so sometimes tests being run on one bench will interfere with tests being run on the bench backing onto it and will cause false test failures. I am looking for some sort of RF screen or something that we can mount and ground between the benches to reduce what we call 'crosstalk'. Thoughts? Genny Gibbard (mailto:[log in to unmask]) ------------------------------------------------------------------------ --------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ------------------------------------------------------------------------ --------- --------------------------------------------------------------------------------- Technet Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ---------------------------------------------------------------------------------