Sender: |
|
X-To: |
|
Date: |
Fri, 22 Jun 2001 16:59:54 -0400 |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Content-Transfer-Encoding: |
7bit |
Content-Type: |
text/plain; charset="iso-8859-1" |
From: |
|
Parts/Attachments: |
|
|
Hi Lou,
Unfortunately, calibration of equipment by the manufacturer seems to always
be costly. I also have specific equipment that must be calibrated by the
manufacturer. Short of replacing the equipment with a more generic unit that
can be calibrated by just about anyone, the only thing left to consider is
the frequency of the calibrations. For example, If your records show you
have an item that is calibrated annually and this unit has been found to be
in calibration for the last 5 years, then you might consider changing the
frequency to perhaps once every two years to amortize the cost a bit. Bottom
line is that some calibration costs are extremely expensive and unless you
have alternate viable calibration source, your pretty much stuck with what
they want to charge.
Just my thoughts,
Ed Cosper
----- Original Message -----
From: "Lou Hart" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, June 22, 2001 4:15 PM
Subject: [TN] ICT calibration
> TechNetters, May I have some guidance on calibration of a GenRad
in-circuit
> tester? GenRad has quoted US$3240 for calibration (said to be a full
day's
> work), 1100 (5 hours at 220/hour) for travel (Massachusetts to Pittsburgh
> area), and 750 for expenses. Total is 5090, a big number to me. What do
> other assemblers do to maintain ICTs and keep them calibrated? Thanks for
> any comments. Lou Hart
>
> --------------------------------------------------------------------------
-------
> Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt delivery of Technet send the following message: SET
Technet NOMAIL
> Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional
> information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
> --------------------------------------------------------------------------
-------
>
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|